Hallo, ich versuche seit Stunden vergeblich das SP1 zu installieren...
a. Avast Security ist deinstalliert
b. Windows Update Vorbereitung ausgeführt (eine KBA.... installiert)
1. Durchlauf des SP1 scheiterte mit Fehler
0x80004005
, seit dem lässt sich eine erneute Installation nicht mehr anstoßen.
Grund:
bcdedit findet die boot/bcd datei nicht
Ursache:
Seit der gescheiterten und zurrückgerollten SP1 installation steht in der Registry als Firmwaredevice die erste Festplatte 0/Partition 1
Die geschützte 100MB Partition liegt jedoch auf Festplatte 1 und funktioniert einwandfrei.
Grund könnte das Intel Matrix Storage Raid sein (Beide Festplatten sind je ein Raid1) welches den Setup verwirrt?
Lösung:
In der Registry das Firmwaredevice fixen, SP1 installation startet wieder, bricht aber weiterhin bei 99% ab und macht einen Rollback wie beim ersten Fall.
Auszug aus der Log mit dem Problem:
2014-04-17 02:44:11, Info CBS SQM: Initializing online with Windows opt-in: False 2014-04-17 02:44:11, Info CBS SQM: Cleaning up report files older than 10 days. 2014-04-17 02:44:11, Info CBS SQM: Requesting upload of all unsent reports. 2014-04-17 02:44:11, Info CBS SQM: Failed to start upload with file pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT = 0x80004005 - E_FAIL] 2014-04-17 02:44:11, Info CBS SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL] 2014-04-17 02:44:11, Info CBS SQM: Failed to start upload with file pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6 [HRESULT = 0x80004005 - E_FAIL] 2014-04-17 02:44:11, Info CBS SQM: Failed to start always sample upload. [HRESULT = 0x80004005 - E_FAIL] 2014-04-17 02:44:11, Info CBS SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL]
Irgendwer eine Idee?